Aimpoint Acro P-2 3.5 MOA — Compact Red Dot Sight in FDE / Sniper Grey

Overview

The Aimpoint Acro P-2 is a compact, fully enclosed red dot sight designed for semi-automatic pistols and compatible with a wide range of platforms through its integrated Acro mounting interface. Available in FDE or Sniper Grey, it combines a rugged construction, five-year battery life, and a 3.5 MOA red dot for rapid target acquisition.

Its fully enclosed optical channel protects the reflective lens and LED emitter from dust, moisture, and contaminants. Hardened front and rear glass further protects the optic, especially during use on a semi-automatic pistol slide.

Choose Your Color

Fully Enclosed Pistol Design

The Acro P-2 uses a fully enclosed housing rather than an open-emitter lens design. This construction seals the optical channel from the environment and protects the LED emitter. It is particularly well suited to pistols, where the optic must withstand repeated slide acceleration, vibration, mechanical stress, and impact.

The sight has been tested on a .40 S&W pistol slide for more than 20,000 rounds. Its high-strength 7075-T6 aluminum housing with a non-reflective anodized finish combines low-profile dimensions with durable protection.

3.5 MOA Red Dot

The 3.5 MOA red dot is designed for fast and intuitive target acquisition. Its three-dimensional orientation supports quick alignment of the dot within the viewing window and can shorten the learning curve for new users.

The sight is operationally parallax-free, provides unlimited eye relief, and has a 15 × 15 mm clear aperture. It is compatible with night vision devices and uses multi-layer anti-reflex lens coatings.

Battery Life and Settings

The Acro P-2 is powered by one 3 V CR2032 lithium battery and provides up to 50,000 hours, or approximately five years, of continuous operation at daylight setting 6. The quick-access battery compartment allows battery replacement without removing the sight from the pistol.

Digital push buttons select ten brightness settings: four compatible with night vision devices and six daylight settings, including one extra-bright level. The sight starts at setting 7 of 10.

Adjustment and Mounting

Windage and elevation adjustments are flush-mounted to help prevent accidental changes. Clicks are tactile and audible, and initial zeroing is performed with the supplied Aimpoint T10 tool.

The sight uses an integrated Acro interface, compatible with mounting plates for most optic-ready pistols and mounting solutions for carbines, shotguns, and rifles. Recommended torque between the mount and sight is 3.0 Nm.

Ruggedness and Water Resistance

The Acro P-2 is submersible to 35 m / 115 ft and operates from -45 °C to +71 °C. It withstands vibration, temperature shock, humidity, and occasional exposure to weapon cleaners, lubricants, fuels, and insect repellents.

Flip-up lens covers are sold separately as accessories, particularly for carbine, shotgun, or rifle applications.

Technical Specifications

• Type: Fully enclosed LED reflex collimator red dot sight
• Magnification: 1x
• Reticle: 3.5 MOA red dot
• Dot color: Red
• Light wavelength: 650 nm red light
• Brightness settings: 10 positions, 4 NVD and 6 daylight settings, including 1 extra-bright setting
• Start setting: Position 7 of 10
• Night vision compatible: Yes
• Clear aperture: 15 × 15 mm / 0.59 × 0.59 in
• Eye relief: Unlimited
• Light transmission: Average 70% between 420 and 900 nm
• Power source: One CR2032 3 V lithium battery
• Battery life: Up to 50,000 h / 5 years at daylight setting 6
• Controls: Digital push buttons
• Windage / elevation adjustment range: ±1 m at 100 m
• Adjustment increment: 20 mm at 100 m per click
• Mounting interface: Integrated Acro interface
• Mount-to-sight torque: 3.0 Nm
• Mount-to-rail torque: 1.25 Nm
• Optical-axis height: 14 mm above mounting platform
• Sight-only dimensions: 47 × 33 × 31 mm / 1.9 × 1.3 × 1.2 in
• Sight-only weight: 61 g / 2.2 oz
• Housing: High-strength 7075-T6 aluminum
• Finish: Semi-matte non-reflective anodized
• Water resistance: Submersible to 35 m / 115 ft
• Durability: Tested for more than 20,000 rounds of .40 S&W on a pistol slide
• Operating temperature: -45 °C to +71 °C / -49 °F to +160 °F
• Storage temperature: -51 °C to +71 °C / -60 °F to +160 °F
• Lens covers: Sold separately

Key Benefits

• Two color options: choose between FDE and Sniper Grey.
• Fully enclosed design: the optical channel is protected from elements and contaminants.
• 3.5 MOA red dot: fast acquisition and intuitive aiming.
• Five-year battery life: up to 50,000 hours on one CR2032 battery.
• Night vision ready: four settings dedicated to NVD use.
• Battery change without dismounting: replace the battery without removing the sight from the pistol.
• Built for pistol-slide stress: tested with more than 20,000 rounds of .40 S&W.
• Submersible to 35 m: suited to wet and demanding environments.
• Acro interface: compatible with a wide selection of mounting plates and solutions.

What's Included

• 1 Aimpoint Acro P-2 3.5 MOA red dot sight in the selected color
• 1 CR2032 3 V lithium battery
• 1 Aimpoint T10 adjustment tool
• Aimpoint documentation